Build Day 73....Rear Suspension

Moved to the rear suspension today. Made up and welded on the trailing arm brackets:



I was then able to temporarily assembly the rear suspension system, complete with de-dion axle:



This allowed me to position and tack on the chassis side bracket for the panard rod. Note also that the other side of the panard rod is not attached to the de-dion. I will need to cut off the bush tube at that end and replace it with an adjustable spherical rod.

You can also see that I've put the differential into it's intended position:



The reason for this is so that I can start fabricating brackets to hold it in place.